Відео

Thanks for your directions. Much more clear than the instruction booklet!

Glass Shatters A few moments later Hey car mechanic, i tried removing the lightbulb put it shattered everywhere... Man hides the pilers lmfao

Wow, follow your video and save some money this weekend. So awesome, thank you!

Awesome, thanks

How do i clean the filter on my kenmore dishwasher

How did you determine it was that specific part that needed replacing?

thank you for instruction on using Test All Valves (8:51). I needed to know that you choose the area, hit Manual Start, then return switch to Auto, and it will test each station for 2 minutes. I made the mistake of trying this when my sprinklers were actually timed to start (just by coincidence) and things went a bit wonky until I realized it and just turned the switch back to auto. Thanks for this very clear instruction for a 2000 to 2015 year program.

Just turn the washer around. Saves time and money.

Yes, exciting.

Can you overlay an existing concrete deck?

VERY---VERY---GOOD LESSON---THANX,,DAGARRY.

This was straightforward and clear without any fluff or filler, and showed all of the important steps. It let me fix something stuck in the impeller without a service call, and my dishwasher is now also cleaner than it ever has been. Thanks!

Programs A, B, and C run at the same time. The selected switch is for programming. If you have a program set up for each A, B, and C, they will all run.

Is there an audio listen what’s going on around?

Great tutorial. Simple and to the point. My water constantly makes a running/hissing sound inside my garage. Hopefully this gauge and adjusting the pressure helps. Thx again

Hello, I have a green box in my yard and it fills with water. Is there something that needs to be turned off inside the green yard box?

I have a liftmaster the door will open once then if I lift it again it will stop in the up position and all power shuts off. In about 20 seconds it will light up again. After trouble shooting I could hear a clicking in the motor and could bump the motor and have the lights come back on. I checked the boards and couldn't see a bad soder. Any ideas.

Thanks a lot it is really useful. I salute you man👍

1:15

Lost tech - distributor points file from pre-electronic ignition in a 50s to 70s car. Try to keep the point so that they maintain contact across the whole surface. This minimizes the current density and minimizes the chance for further arcing.

Hmmm what if you do not have a striker button?

Should've oiled the bearings on the other side of the motor, too, while you had it apart.

Thanks for a very helpful video.

There's an easier way! 🤟

What does it cost?

Thank you! I just followed instructions, unscrewed both relief valves as I didn’t see any debris in #1. Upon reinstall and water turned back on, leak is gone! Will check back tomorrow. Thanks for the video!

Thank you for this. I had the problem where my garage door would just click and not move. Determined that was circuit board. My lift master is so old I had to buy a used board off of eBay but followed your instructions( good tip on color coding the wires). $30 with shipping and I’m back in business. Thank you. Subscribed.

Balancing not accurate but general idea.

thank you.. you saved me 300$

Thanks man u help me too , it's my 1st time. I am sure I will be back manytimes to this video.. 😂😂😂

This was super helpful and exactly what I was looking for, thank you!!

My preventer was removed and I don’t want to use sprinklers. How do I handle the two open holes left from the device?

Thanks bro, this helped us out. I just got back in town & the kids & wifey were taking cold showers. It works! Thanks

Thank you so much 😊

I just want to replace the motor. Where can I buy that at?

You’re a really tidy guy. It’s nine years later now. Are you still tidy and meticulous, or did you give it all up for assisted living? Or, are you the maintenance guy at the assisted living place?

Great fix, thank you. Resoldered those connections and put on a new antenna and garage door works perfectly now!

Thank you that was informative

Thank you I have searched all over for this exact thing.

Thank you for excellent video. My Maytag washer was directly start agitating without filling water either at the beginning OR during rinse. I suspected it is timer, so used your video as guide to repair it and saw 2 pins got shorted inside, so separated them, filed and put it back. It is working fine now. You saved me $100+ just for part and repairmen asked $300 parts+labor for repair. It hardly took 30 min to do this repair myself using your video. Part that I repaired was W10111389.

Spatula? Plastic knife? Sure these work, but I've used a stiff 1.5" putty knife. Plus the putty knife is stiffer which makes it much easier to use. AND the wife isn't gonna complain you "ruined" her spatula! There is plenty of room to slip it under the control panel without risking scratching the washer, just make sure the putty knife is clean and rust free and you won't scratch any paint

Thanks for your help. I’m 25 and have my own lawn now. I’ve edged my dad’s lawn growing up but never had to reline it. Thanks for helping me further become a man

My door is closing and then coming right back up. Nothing to do with the sensors since I eliminated them when I had the unit installed a while back. My kids are grown and my dogs are never in the garage or near it.

Thanks a lot ! I was able to fix by looking at the video

Thank you so much for making this video. I needed this exactly since my washers lid switch broke and was not 100% sure how to replace. God bless.

Wow. Thanks Adam. Exactly what I needed to see. I have a spoon wrenched inbetween the grinder ring and the hopper wall. And now I know or guess that it is because that plate is wearing thin? I truly appreciate your video enough to subscribe.

I just bought the Craftsman 3400 psi washer and I knew right off not to do some of the things another video did, like not hook up the water first. Great video sir.

Thank you. Easy fix.

I used your video to troubleshoot my dryer and the thermal fuse was open. Got a couple replacements off Amazon and voila the dryer works! Thank you!

Excellent, you did it. Great job 😂